AUDIOLINE POWER-PMR 20 Instructions d'exploitation télécharger pdf (Page 23)

Operating the Walkie−Talkies

4 Operating the Walkie−Talkies

Display and explanation of operation sequences

 Press the button displayed

,  Press and hold the button

displayed

,  Release the button displayed



2  Display indicator flashes

 Speak into the microphone

Switching the walkie−talkies on/off

Switching on

Turn the volume control clockwise. An acoustic signal is issued.

The currently active channel appears in the display and the Ready

LED flashes.

Switching off

Turn the volume control anticlockwise until the display content dis-

appears.

Volume control

Turn the volume control until the required volume is set.

Transmitting and receiving

Send

After pressing the  button, the Ready LED lights up.

If the  button is pressed longer than 60 seconds, a warning

signal is issued. Transmission is interrupted.

, ,  Transmit

Hold the walkie−talkie approx. 5 to 7 cm from your mouth

and speak at a normal volume. In order to talk to other sub-

scribers, the respective walkie−talkies must be set to the

same channel and CTCSS code.

Receiving

,  Receive

Radio signals cannot be received when the  button

is being pressed.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Pas de commentaire

AUDIOLINE POWER-PMR 20 Instructions d'exploitation Page 23