AUDIOLINE POWER-PMR 20 Instructions d'exploitation télécharger pdf (Page 21)

- Commissioning -

2 Commissioning

2.1 Check contents of pack

The following items are supplied

two walkie-talkies with belt clip one double charging station

two battery packs one mains power supply

one instruction manual two headsets

2.2 Fitting the battery packs

Your walkie-talkie is supplied with two rechargeable Ni-MH battery

packs, which must be fitted before using the equipment.

1. Unclip the battery compartment cover on the rear and open the

compartment. If the belt clip has been fitted, this must be

removed first.

2. Now insert the battery pack taking care to ensure that the polarity

is correct. The wrong polarity can damage both the battery pack

and the unit.

3. Close the battery compartment.

Note: When the battery pack is weak and needs to be recharged, the

battery symbol

will flash in the display. When the battery is fully

charged, the

symbol will appear.

Note: In place of the battery pack you can also use four 1.5V AAA

batteries. Please use only the best quality.

Take care to ensure that the polarity is correct when inserting.

Do not place the walkie-talkie in the charging station if you are using

normal batteries.

Do not throw batteries into the fire or immerse in water. Do not

dispose of old or defective batteries with the normal household waste.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Pas de commentaire

AUDIOLINE POWER-PMR 20 Instructions d'exploitation Page 21